HOUSE BILL NO. 2246 103RD GENERAL ASSEMBLY
INTRODUCED BY REPRESENTATIVE WOLFIN.
5159H.02I JOSEPH ENGLER, Chief Clerk
AN ACT To repeal sections 300.295 and 304.035, RSMo, and to enact in lieu thereof two new sections relating to the sole, exclusive, and specific purpose of railroad crossing safety requirements for on-track equipment, with penalty provisions.
Be it enacted by the General Assembly of the state of Missouri, as follows:
Section A. Sections 300.295 and 304.035, RSMo, are repealed and two new sections 2 enacted in lieu thereof, to be known as sections 300.295 and 304.035, to read as follows: 300.295. 1. Whenever any person driving a vehicle approaches a railroad grade 2 crossing under any of the circumstances stated in this section, the driver of such vehicle shall 3 stop within fifty feet but not less than fifteen feet from the nearest rail of such railroad, and 4 shall not proceed until he can do so safely. The foregoing requirements shall apply when: 5 (1) A clearly visible electric or mechanical signal device gives warning of the 6 immediate approach of a railroad train or any on-track equipment; 7 (2) A crossing gate is lowered or when a human flagman gives or continues to give a 8 signal of the approach or passage of a railroad train or any on-track equipment; 9 (3) An approaching railroad train or any on-track equipment is plainly visible and is 10 in hazardous proximity to such crossing. 11 2. No person shall drive any vehicle through, around or under any crossing gate or 12 barrier at a railroad crossing while such gate or barrier is closed or is being opened or closed. 304.035. 1. When any person driving a vehicle approaches a railroad grade crossing, 2 the driver of the vehicle shall operate the vehicle in a manner so he will be able to stop, and he 3 shall stop the vehicle not less than fifteen feet and not more than fifty feet from the nearest 4 rail of the railroad track and shall not proceed until he can safely do so if:
EXPLANATION — Matter enclosed in bold-faced brackets [thus] in the above bill is not enacted and is intended to be omitted from the law. Matter in bold-face type in the above bill is proposed language. HB 2246 2
5 (1) A clearly visible electric or mechanical signal device warns of the approach of a 6 railroad train or any on-track equipment; or 7 (2) A crossing gate is lowered or when a human flagman gives or continues to give a 8 signal or warning of the approach or passage of a railroad train or any on-track equipment; 9 or 10 (3) An approaching railroad train or any on-track equipment is visible and is in 11 hazardous proximity to such crossing; or 12 (4) Any other traffic sign, device or any other act, rule, regulation or statute requires a 13 vehicle to stop at a railroad grade crossing. 14 2. No person shall drive any vehicle through, around or under any crossing gate or 15 barrier at a railroad crossing when a train or any on-track equipment is approaching while 16 such gate or barrier is closed or is being opened or closed. 17 3. No person shall drive a vehicle through a railroad crossing when there is not 18 sufficient space to drive completely through the crossing. 19 4. No person shall drive a vehicle through a railroad crossing unless such vehicle has 20 sufficient undercarriage clearance necessary to prevent the undercarriage of the vehicle from 21 contacting the railroad crossing. 22 5. Every commercial motor vehicle as defined in section 302.700 shall, upon 23 approaching a railroad grade crossing, be driven at a rate of speed which will permit said 24 commercial motor vehicle to be stopped before reaching the nearest rail of such crossing and 25 shall not be driven upon or over such crossing until due caution has been taken to ascertain 26 that the course is clear. This section does not apply to vehicles which are required to stop at 27 railroad crossings pursuant to section 304.030. 28 6. Any person violating the provisions of this section is guilty of a class C 29 misdemeanor. ✔
Statutes affected: